ADVANCED Dynamic piping stress analysis CAESAR II & AutoPIPE

Hokusai

Administrator
Administrator
Messages
12,276
Reaction score
1
1657041826899.png
Published 07/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + srt | Duration: 27 lectures (3h 55m) | Size: 2 GB
Advanced piping stress analysis course for dynamic loads such as water hammer, slug flow..etc on CAESAR II & AutoPIPE​
What you'll learn
Advanced techniques for piping stress analysis
Flange leak and flange failure analysis on both CAESAR II and AutoPIPE
Understanding dynamic loads and un-steady loads
Underground pipeline stress analysis on both CAESAR II and AutoPIPE
Understanding and modeling of water hammer loads on both CAESAR II and AutoPIPE
Introduction to Subsea pipeline stability and stress analysis
Understanding and modeling of slug flow loads in multiphase flow on both CAESAR II and AutoPIPE
Waves and buoyancy loads on subsea pipelines
Understanding and modeling of pressure relief forces on both CAESAR II and AutoPIPE
Preparation of professional piping stress analysis course
Wind & seismic analysis for piping systems
All of these skills and more shall be demonstrated on both CAESAR II and AutoPIPE software separately

Requirements
Basic understanding of piping stress analysis
Basic knowledge of CAESAR II & AutoPIPE software

Description
This course has been prepared for engineers who have basic understanding of piping stress analysis including static loads, and want to take their skills into next level.
This course consists of 4 sections which are as following :-
Section One :-
  • In this section you are going to learn about the different types of dynamic and harmonic loads on piping systems and advanced skills such as :-
  • Un-steady loads
  • Water hammer loads (Using dynamic - Time history method)
  • Slug flow force (Static & Dynamic - Time history method)
  • Pressure relief force
  • Wind & Seismic analysis
  • How to carry out Time history analysis
  • Also you will learn how to carry out Flange failure check on your system using the following methods
  • Equivalent pressure method
  • ANSI Code method
  • NC Code method
  • ASME Code method
  • All of above, shall be demonstrated separately on both softwares CAESAR II and AutoPIPE.
Section Two :-
  • In this section, you are going to learn about underground pipe stress analysis including the following
  • What is the difference between piping and pipeline ?
  • Why do we have to do pipe stress analysis for underground pipeline ?
  • When do we have to do it ?
  • How different is pipe stress analysis for underground pipeline vs above ground]
  • Supporting systems for underground pipelines
  • And many other important information about underground pipeline systems
  • All of above, shall be demonstrated separately on both softwares CAESAR II and AutoPIPE.
Section Three :-
  • In this section, you are going to learn about subsea pipeline design, including on-bottom stability for subsea pipeline, waves and buoyancy loads on subsea pipelines and subsea pipelines stability counterweight block (Concrete ballasts).
  • And how to create a pipe stress analysis model for a subsea pipeline
  • All of that shall be demonstrated separately on both of CAESAR II and AutoPIPE software.

Section Four :-

  • In the last chapter, you are going to learn how to present your output results in a professionally created piping stress analysis report, including a sample report for real life projects in the middle east.
  • All of that, makes this course the most comprehensive course to take your piping stress analysis skills to another level on both CAESAR II and AutoPIPE software

Who this course is for
Engineers who want to enhance their piping stress analysis skills to an advanced level
Engineers who want to enhance their modeling skills on CAESAR II and AutoPIPE
Engineers into process piping field
Engineers into infrastructure water field
Engineers into Petroleum or Oil & Gas field
 

Similar Threads

Top Bottom